Taian Haiyu Machinery Co., Ltd.
Main products:test bench,high pressure common rail test bench
Products
Contact Us
  • Contact Person : Mr. Zhang Fengjun
  • Company Name : Taian Haiyu Machinery Co., Ltd.
  • Tel : 0086-538-6208888
  • Fax : 0086-538-6205222
  • Address : Shandong,Taian,New and high technology development zone
  • Country/Region : China
  • Zip : 271000

Diesel fuel tank cleaner(wood package)

Diesel fuel tank cleaner(wood package)
Product Detailed
1.HY-Diesel Fuel Tank Cleaner 2.perfect design 3.easy operation 4.high reliability 5.high quality

HY-Diesel Fuel Tank Cleaner

1.Its component is durable and corrosion-resisted.

2.As the diesel fuel is pressed to gear pump after being filtered twice,it can reduce the fray from impurities to the gear pump and guarantee the life of the cleaner.

Method 1, direct cyclic cleaning method 1. Would be an appropriate point of bent heads, through the partition hole on the side of 

cavity inserts 2. The pump tubing inserted in the tank and cleaning the lowest point or side-angle whole cavity 3. Connected to the power will be transferred to shun switch to switch, that is, washing 

machine direction of the normal cleaning 4. Hand-held boom with a nozzle spray tank walls and corners key Method 2: emptying Circulation cleaning 1. Will be a clean vessel into the fuel tank below to open the mailbox at the bottom of 

oil discharge screw, diesel full release 2. Will take the oil pipeline into the container, the injection tube into your mailbox 3. Connected to the power will be transferred to shun transfer switch 4. Back and forth moving fuel injection dry, dry the bottom of the fuel injection 

nozzle is fully clean every corner of the fuel tank, focusing on cleaning the inside of 

the fuel tank and the dead angle. 

In method 1, suggested to underlay 5-10cm in the side of tire, so that fuel tank owns gradient.

Using rotator nozzle when oil mass in oil tank is less than 1/2 or empty.

Using upward jet nozzle when oil mass in oil tank is more than 1/2.

Notes:Tightening the injector when replacing,turn off the power ,clean,replace the filter when the veering pressure beyond 2.5Mpa,protect the tube from stoppage when reversing.the window glass will be broken when the inside pressure of coarse filter tank beyond 1.5 Mpa.Replacement of the filter:01. put the nozzle of the oil tube out of the oil surface02. turn on the veering,stop when the nozzle doesnt injection03. turn on the reverse,stop when the pump tubing doesnt injection

Diesel fuel tank cleaner(wood package)



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.